超高层劲性结构及大型机械设备立体协同施工技术

基于某超高层建筑群项目的主体施工阶段,对超高层劲性结构建筑群项目施工过程中可能遇到的问题,诸如大型机械立体协同、钢结构与钢筋连接节点优化、钢结构桁架层施工等重难点进行总结分析,并提出相应的解决方案以供探讨,可为同类型工程提供参考经验。     

A novel adaptive convolutional neural network for fault diagnosis of hydraulic piston pump with acoustic images

As an essential part of hydraulic transmission systems, hydraulic piston pumps have a significant role in many state-of-the-art industries. Thus, it is important to implement accurate and effective fault diagnosis of hydraulic piston pumps. Owing to the heavy reliance of shallow machine learning models on the expertise and experience of engineers, fault diagnosis based on deep models has attracted significant attention from academia and industry. To construct a deep model with good performance, it is necessary and challenging to tune the hyperparameters (HPs). Since many existing methods focus on manual tuning and use common search algorithms, it is meaningful to explore more intelligent algorithms that can automatically optimize the HPs. In this paper, Bayesian optimization (BO) is employed for adaptive HP learning, and an improved convolutional neural network (CNN) is established for fault feature extraction and classification in a hydraulic piston pump. First, acoustic signals are transformed into time–frequency distributions by a continuous wavelet transform. Second, a preliminary CNN model is built by setting initial HPs. The range of each HP to be optimized is identified. Third, BO is employed to select the optimal combination of HPs. An improved model called CNN-BO is constructed. Finally, the diagnostic efficiency of CNN-BO is analyzed using a confusion matrix and t-distributed stochastic neighbor embedding. The classification performance of different models is compared. It is found that CNN-BO has a higher accuracy and better robustness in fault diagnosis for a hydraulic piston pump. This research will provide a basis for ensuring the reliability and safety of the hydraulic pump.     

基于CFD⁃DEM的水下切粒装置水室内颗粒流动过程数值模拟

基于CFD?DEM耦合方法，研究了颗粒在水室内的流动状态，分析了不同刀盘转速、粒子水通入量和水室出口角度对造粒过程的影响，发现提高刀盘转速、增加粒子水通入量和水室出口倾斜一定的角度都有利于水室内颗粒的排出。进一步研究了颗粒与碎屑在水室内的流动，发现在水室出口处二者的流动基本呈现出一定的分离角度。     

Joint tracking coefficients and the time delay of a nonstationary linear system,preceded by a static nonlinearity

The paper considers a block-oriented nonlinear Hammerstein system that consists of a linear block with real-valued time-varying unknown coefficients and a pure time delay, preceded by the static nonlinearity. The joint tracking of linear block coefficients and the time delay while processing observation samples is under consideration. The difficulty of the tracking process consists in the initial nonconvexity of the objective function to be minimized, in respect of the time delay. To obtain current estimates of the true coefficients and the time delay it is necessary to overcome the multiextremality of the objective function. A global optimization problem could be solved by changing a form of the nonconvex objective function into a convex one. The optimization problem has been subdivided into two problems that are analyzed in this article, as well. The first one consists of removal of the objective function multiextremality in respect of the time delay, while hunting for the global extremum. Therefore, the well-known approach based on the method of corrective operators, which is used to transform the multiextremal criterion into a unimodal function for the nonstationary Wiener system, is developed here for the Hammerstein one. The other problem consists of the applicability of unified adaptive algorithms, used for Wiener systems in the case of Hammerstein systems. The recursive parametric identification technique, based on the adaptive algorithm procedures, is developed here for the nonstationary block-oriented Hammerstein systems, too. The applicability of algorithms is supported by various simulation tests solved by computer for distinct inputs and for two static nonlinearities.     

An improved particle swarm optimisation for unit commitment in microgrids with battery energy storage systems considering battery degradation and uncertainties

Using electric storage systems (ESSs) is known as a viable strategy to mitigate the volatility and intermittency of renewable distributed generators (DGs) in microgrids (MGs). Among different electric storage technologies, battery energy storage (BES) is considered as the best option. In unit commitment (UC) module, the set of committed dispatchable DGs along with their power, power exported to/imported from macrogrid and status and power of ESS units are determined. In this paper, BES degradation is considered in UC formulation and an efficient particle swarm optimisation with quadratic transfer function is proposed for solving UC in BES‐integrated MGs, while the uncertainties of demand, renewable generation and market price are considered and dealt with robust optimisation. UC is formulated as a multi‐objective optimisation problem whose objectives are MG operation cost and BES degradation. The resultant multi‐objective optimisation problem is converted into a single‐objective optimisation problem and the effect of weight factors on MG operation cost and BES lifecycle are investigated. The results show that by consideration of BES degradation in objective function, BES lifecycle increases from 350 to 500 and the minimum depth of charge increases from 5.5% to 34%; however, MG operation cost increases from $8717 to $8910.2. The results also show that by consideration of uncertainties, MG's operation cost increases by 8.22%.     

接触器触头系统振动机理分析及算法优化

为了解决合闸过程中动、静触头接触引起的振动弹跳问题.本文建立了接触系统的二自由度运动微分方程,并利用遗传算法对交流接触器吸合过程进行优化,同时通过高速摄影实验对接触弹跳的全过程进行了观察和分析.结果表明:理论与实验结果高度一致,铁心在触头分离前发生碰撞,进一步加剧触头弹跳;铁芯弹跳再次碰撞时,触头的弹跳不受影响;在接触器运行过程中,动铁芯的运动会引起系统轻微振动;采用遗传算法优化的接触器触头弹跳时间和最大振幅均减小.研究结果为进一步控制和减小接触弹跳提供了理论依据.     

Investigation of the ultimate particle size distribution of a carbonate sand

A series of ring shear tests were conducted to investigate the ultimate particle size distribution of a carbonate sand. The tests were carried out under different stress levels, on three types of specimens: 1) uniformly graded specimens made of dry natural sand 2) remoulded specimens of the crushed sand after first shearing to large strains 3) specimens made of natural sand grains but with the same grading as in (2). The first series of tests on type (1), carried out to very large strains, led to apparently stable gradings, distinct for each stress level. Only limited additional particle breakage could be induced by remoulding the specimens after shearing (type (2)) and subjecting them to more shearing. Tests on specimens created at the apparently stable gradings (type (3)) but from the intact sand particles however led to significantly greater breakage. For the three types a stable, fractal grading was achieved. Analyses of the soil particles’ shape showed that the aspect ratio, sphericity and circularity reach a steady value at large strains, in parallel to reaching a stable grading. The mobilized angle of shearing resistance however was not significantly different in the different types of samples, suggesting the final grading dominates the behaviour.     

An AW-HARIS Based Automated Segmentation of Human Liver Using CT Images

In the digestion of amino acids, carbohydrates, and lipids, as well as protein synthesis from the consumed food, the liver has many diverse responsibilities and functions that are to be performed. Liver disease may impact the hormonal and nutritional balance in the human body. The earlier diagnosis of such critical conditions may help to treat the patient effectively. A computationally efficient AW-HARIS algorithm is used in this paper to perform automated segmentation of CT scan images to identify abnormalities in the human liver. The proposed approach can recognize the abnormalities with better accuracy without training, unlike in supervisory procedures requiring considerable computational efforts for training. In the earlier stages, the CT images are pre-processed through an Adaptive Multiscale Data Condensation Kernel to normalize the underlying noise and enhance the image’s contrast for better segmentation. Then, the preliminary phase’s outcome is being fed as the input for the Anisotropic Weighted–-Heuristic Algorithm for Real-time Image Segmentation algorithm that uses texture-related information, which has resulted in precise outcome with acceptable computational latency when compared to that of its counterparts. It is observed that the proposed approach has outperformed in the majority of the cases with an accuracy of 78%. The smart diagnosis approach would help the medical staff accurately predict the abnormality and disease progression in earlier ailment stages.     

基于响应曲面法的涡轮增压器废气阀门激光焊接工艺优化研究

激光焊接技术凭借其高效、高精度的特点已广泛应用在汽车制造产业,在涡轮增压器的生产中,激光焊接也逐步被应用于实现废气阀门与阀杆的连接。虽然当前对于激光焊接的工艺研究很多,但对工艺参数的优化也一直缺少一个科学有效的方法。本文以熔接深度、熔接宽度和内部缺陷作为响应变量,选取焊接功率、焊接速度作为因子,运用响应曲面法(RSM)设计实验方案,通过对响应结果进行分析,研究焊接参数对焊接质量的影响,拟合能够预测最优参数的数学模型,最终将获得的最优参数运用到生产中进行验证。